Table of contents

The separators of the solid and liquid phases are widely used in agriculture, industry, environmental protection and other areas. Its main function - separation of solid particles from liquid in a mixture of solid and liquid substances. Solid and liquid phase separator allows not only to effectively reduce the volume of the mixture, but also reduce the complexity and cost of waste processing. He can also process and re -use of resources.

Inclined sieves and spiral separators of the solid and liquid phases are two common types. Understanding both types of feces of solid and liquid phases separator principle of operation will help you choose the most suitable device for your specific needs. Increase production efficiency and economic benefits. The following is a detailed explanation of these two feces solid and liquid phase separator principle of operation.

The separator of the solid and liquid phase with inclined sieve

Feed:

The mixture is supplied to the inclined surface of the sieve using a nutrient pump or a gravity.

The process of separation:

The mixture rolls along the surface of the inclined sieve. During the process, the liquid flows through the small holes of the sieve and enters the assembly tank.
Solid particles are delayed by sieve due to different sizes, Forms or weight and gradually slide by the end of the sieve.

Solid discharge:

Solid particles, accumulated at the end of the sieve, Pushed under the action of power severity or scraper and, finally, unloaded from the exhaust opening.

Choosing a sieve:

Aperture and material of the inclined screen are regulated depending on the properties of the processed materials. To optimize the effectiveness of separation.

Spiral separator of the solid and liquid phase

Feed:

The mixture enters the supply port of the spiral separator through the supply system.

The process of separation:

The mixture is supplied to the filter cartridge with a screw shaft.
Rotation of the screw shaft creates traction. This pushes the mixture forward and at the same time exerts pressure.
Under pressure, the liquid is thrown through the filter holes in the wall of the filter cartridge. Solid particles are pushed to the end of the filter cartridge using a screw shaft.

Dehydration under pressure:

The design of a spiral shaft with a gradually increasing step leads to that, that solid particles are subject to gradually increasing pressure as it moves forward. This squeezes the liquid even more.
This process of dehydration under pressure increases the dryness of solid drainage.

Solid discharge:

Compressed solid particles are finally unloaded from the final opening at the end of the filter cartridge.

I hope to learn more about feces of the hard and liquid phase separator principle of operation. Can help you choose Equipment for the separation of solid and liquid feces, which is right for you. Or you can contact us to get professional consultation.